As the famous song says, "nature has no bad weather," but there is inconvenience in every season. It is too hot in summer, wet and in spring and autumn, and slippery in winter. It is icy sidewalks that cause a large number of injuries and bruises. Is it possible to protect yourself from this trouble? Yes, if you know what to do to keep your shoes from slipping.
Cheap and angry
Snow, New Year, gifts, fun ... But here is one careless step - and you, fearing to fall and hurt yourself, scold your slippery shoes, and there is not a trace from a good mood. The climatic conditions of our latitudes are such that the temperature drops in winter lead to a prolonged ice. Therefore, the question of what can be done so that the shoes do not slip, requires quick solutions, and, if possible, not one.
Since the ice has been known to mankind since the appearance of life on Earth, there have been enough ways to improve shoes during this time. All of them are united by three factors:
A smooth sole (this is precisely the reason for the slip) must be made more prominent, so that there is grip between the ice and the boot. To improve the shoes you need a few minutes and simple tools at hand.
10 ways to make the sole non-slip
At school in physics, we talked a lot about the force of friction and know from experience that in winter it is absent on the icy surface. So what is needed are "inventions" that allow this very power to be created.
Our grandmothers also glued a medical patch to the sole of a criss-cross. But in the conditions of the modern metropolis and rhythm of life, it is unlikely to last long. But it is convenient to carry a band-aid, and it will take you literally 1-2 minutes to change it.
Another fabric way to slow down the sole is to glue pieces of felt. It is best to do this on the “Moment” glue and apply not solid pieces of cloth the size of a shoe, but small pieces. This method is much more practical than the previous one, but also short-lived.
What people do not think up to do so that the shoes do not slip in the winter! Continuing the theme of fabric means, it is impossible not to note a rather effective, but very doubtful in terms of aesthetics way to facilitate your movement on the ice. Thick (woolen) socks are worn on boots or shoes. True, the socks after such an exit will have to be thrown away - they will rub.
This is one of the most popular ways to increase traction between ice and the sole. Glue "Moment" is applied to the shoes, a piece of sandpaper is applied. It is advisable to take coarse-grained paper, because fine-grained paper quickly becomes unusable.
If there is no sandpaper on hand, but there is not too fine sand (for example, from cat litter), then it can also be used to increase the friction force. The sole is smeared with Moment glue, and then is covered with sand. Since the world is nothing eternal, and this method can not be called a panacea.
Yes, yes, we were not mistaken. It is a kitchen grater. Sole spend 2-3 times on a coarse grater. The procedure will have to be repeated 1 time in 2-3 days. There is one "but" in this way: the sole ceases to look aesthetically pleasing. Yes, and you should not get involved: you can make holes in it. By the way, some of the inventors put a scotch tape on their shoes. Effectively, but this method is suitable only for those who love constant attention to their person.
Such a title is not an item in the menu, but one of the options telling you what to do so that winter shoes do not slip. Before each exit on the ice it is necessary to rub the sole with a potato. With the same purpose, you can use a solution of water and starch, prepared in a ratio of 1: 1.
Usually the sole is caused by constant slipping. To fix the situation, you need to clean the surface and make a shallow scratch with a knife or a thick - Gypsy - needle. Just be careful not to damage the sole, otherwise there will be holes in your shoes!
For better grip on the sole of the shoe should be reliefs. To create them, you can use a soldering iron or a burner. Just pay attention to the fact that all movements should be slow and careful so as not to burn through holes.
This popular method can be called the most reliable. Small screws are screwed into the sole, and the protruding part is cut off. In this case, the sole on shoes or boots should be thick enough for such an undertaking. There is a drawback to this method: after completion, your shoes will clatter and may scratch wooden floors.
Ledostupy - an elastic tape with spikes, which is worn on the shoe. This device has no restrictions, it is easily removed, compact, affordable and does not spoil the shoes. Such ledostupy can be done by hand: stick spikes on old bicycle tires.
How to choose non-slip shoes?
When we talk about treatment, we always remember the popular expression that the disease is easier to prevent. In the case of a slippery sole, it is much less troublesome to buy the “right” shoes from the start. Such a choice implies:
- embossed thick tread;
- light weight pair of shoes;
- natural fabrics.
If these requirements do not coincide with your aesthetic demands, then even before the first exit to the street, consider a method of protection against slipping.
If you like to feel firm, non-slip soil under your feet, then you will probably need information on what to do to keep your shoes from slipping. From the entire list of popular ways to “slow down” shoes and boots, one has to choose the most suitable from the point of view of realization, but at the same time sparing for shoes. And do not forget that the safest yet will be a relief protector.