Roses of the tapes do it yourself

Making roses from satin ribbons is not at all complicated. Each needlewoman, holding the ribbons and needles, will be able to create stunning flowers with her own hands. From these roses, you can collect whole bouquets, they can decorate accessories and furnishings, as well as be used for decoration of various celebrations.

Rose from satin ribbon: master class

Roses of the tapes do it yourself

You will need:

  • long satin ribbon
  • needle,
  • thread in the tape,
  • scissors.

Manufacturing:

  1. Take the harvested satin ribbon by the edge, bend it at a 45 degree angle, leaving a small tail. The place of the fold itself must be trimmed over the edge with threads to match the chosen tape.
  2. The next step will be the formation of a triangle. To do this, bend the ribbon once more to visually get this geometric shape. Similar to the first fold, leave a small tail, and fold the edge of the fold with thread.
  3. Bend the tape again. It is necessary to bend it as if in a circle, but since bending occurs at an angle, the shape of their tape will look like a square. The tape for this fold should overlap the tail left during the first bending. This bend is also necessary to flash. To get a square, make another fold. After that, you will remain free most of the tape. She will be on top.
  4. Turn the resulting square so that the free part of the tape is at the bottom, and continue working. At the very beginning of the work, you still have a small tail, which is now visible on the right side of the formed square. Turn the product so that the free tape is laid on your fingers.
  5. While holding the ribbon with your fingers, again start to bend into a square at the same angle, but you no longer need to sheathe the edges; it is enough to fix the bent tape with your fingers. Thus, over the square, which serves as the base, we get another square, characterized by volume. Continue forming volumetric squares in the same way.
  6. These squares of ribbons will serve as petals, so the pomp of the future rose depends on their number. Fold such squares until you have enough ribbons. From the remaining piece, form a flagellum, the edge of which is placed in the core of the pile formed by the squares. Stretch the flagellum inside the pile so that it comes out on the other side.
  7. Ribbon squares slightly expand so that their peaks peeking out from each other. Thereby you will receive an imitation of rose petals. When the rose from the ribbon becomes as close as possible to the real one, turn the product upside down with the base. Try to sew the remaining tape tail as tightly as possible to the base. In the end, you should get a kind of convex circle in the place where the tail of the ribbon is sewn to the flower. Rose from satin ribbon ready.

Two-tone satin roses

Roses of the tapes do it yourself

You will need:

  • Tapes 2.5 cm wide - 2 lena 0.5 m in different colors,
  • needle,
  • thread in the tape,
  • candle and matches,
  • scissors.

Manufacturing:

  1. Each tape cut into small pieces (5 cm), so you get 10 pieces of each color. At the same time, remember, if you want to make a rose more magnificent, take a ribbon of greater length. To prevent the edges of the cut pieces of the tape from spreading, fix them with a burning candle. To do this, carefully slide each side of a piece of ribbon along the top flame of a candle.
  2. Take one piece of tape in your hands and bend each side of it so that the result is a triangle. Bend the corners of the base of such a triangle inward. A piece of Lena after all the bending operations will take the form of an open envelope. Fix the curved ends by sewing them with a thread. Do the same operation with the rest of the blanks. So you get petals for a future rose.
  3. Now you can begin to sew the petals into a rose. Start the process from the center. Sew each new petal to the edges of the previous ones. Do not forget to alternate colors. When all the petals are sewn, only a little fluff will be left. Now the flower is ready!

How to make a rose from a wide satin ribbon?

Roses of the tapes do it yourself

You will need:

  • 6.5 cm - 90 cm wide tape
  • thread in the tape,
  • needle,
  • scissors.

Manufacturing:

  1. Fold the ribbon, prepared for work, face down out in half. It is necessary to fold in length, i.e. one side edge connected to the other.
  2. The thread must be threaded into the needle and sew the tape from the corner adjacent to the fold line to the folded edge. The first stitches should run at a 45 degree angle. At the same time make sure that the stitches are on the same line. Next, make a basting on the edge. When sweeping to the end of the ribbon, continue the stitches to the upper corner, opposite to the one from which you started. The ends of the thread remaining after basting must be left free.
  3. Pull the loose thread at one end and assemble the tape along its entire length. From the beginning of the basting form a central bud. To do this, simply wrap the ribbon once and secure it with stitches.
  4. Around the received central bud continue to twist the tape. Each turn do not forget to fasten along the line of basting or above. Mount as close as possible to the center.
  5. At the end of work, fasten the thread and the end of the tape so that the stitches of the basting and fasteners are not visible. Now your luxurious rose is ready.

Where is artificial roses used?

Roses of the tapes do it yourself

Despite the ease of manufacture, roses made of handmade satin ribbons will be an excellent element for the decoration of any thing. They can be placed on the cover of a photo album or personal diary, making these little things more romantic.

Very often, these roses are used to create jewelry. A flower made of ribbons can be easily attached to a hair tie, a rim or to make a brooch out of it. Brooches are very popular, because wearing large cloth flowers is now in vogue.

Roses of satin ribbons can be an important attribute of a wedding celebration. Of these, you can make boutonnieres, jewelry on the car and even a bridal bouquet. In addition, such flowers can be a bright decoration of a dress or shoes. Charming they will look and in a wedding hairstyle.

Spectrum of use roses from satin ribbons very wide. Make them simple enough. Various schemes will help create a variety of flowers for various needs. How and why to use them is up to you. Show imagination, and many of your things will be transformed.

Add a comment