How to whiten a bath at home

Take a bath, have a cup of coffee ... Only from one thought about the radiant whiteness of the bath, filled to the brim with hot water and fragrant foam, we can instantly feel relaxed and light throughout the body. What to say about real immersion in this bliss. But over time, the bath becomes not so radiant, and the whiteness slightly changes its shade. And you have to think about how to whiten a bath at home, because in the dry cleaning or washing it will not pass.

How to clean the bath at home: choose the tool depending on the type of coating

the day begins with a bath, and it ends with it

As you know, the day begins with a bath, and it ends with it, so whether you like it or not, you will have to clean it. But here is not so simple. The method of cleaning or bleaching, as well as the means used for this purpose, depend on the material from which your bath is made, as well as on the causes and nature of the pollution. Let's look at this:

  • Baths of cast iron, enameled. Here all means are good, including powdered, chemically active substances down to acid and alkali.
  • Acrylic baths. These beauties are more tender, therefore usual detergents for dishes will help to cope with them. However, the basis of the polymer is easily washed with water.
  • Heavily soiled old bath with enamel coating. This is a particularly difficult case, requiring an impressive arsenal: starting from oxalic acid and ending with grinding wheels for a drill, sandpaper and fresh enamel coating. This is if the bath is a family heirloom and you can’t part with it. And so, actually, today you can buy a new quality bath for a fairly low price.

How to clean the bath at home: the main ways

use any scouring powder combined with a metal sponge for maximum effect

First information for those who have mastodons in the iron industry, covered with enamel, in the bathroom. There is nothing to be afraid of in your situation - it won't be worse, so you can safely apply any scouring powder in combination with a metal sponge to achieve the maximum effect. Everything is trivially simple: we wet the bath, we fall asleep with a large amount of powder and in a quarter of an hour we begin to wash. Particularly problematic areas are treated with chlorine-containing agent "Whiteness".

Many are interested in how to whiten a bath at home with soda. For the elderly bath and recipes from the chest:

  1. We take soda ash, slightly bleaching washing powder and a tablespoon of vinegar.
  2. We mix all this and dilute it with water to a slurry, put the mixture on the bath and let it dry.
  3. Next - sponge in hand and scrub until it shines.

If the old baths are ready to tolerate any treatment, then the modern ones are much more capricious and they will not tolerate experiments on themselves. Here we can not do without softness and tenderness. You will need products with a cream base and a low content of abrasive components, as well as only a soft sponge. Apply the cleaning paste to the bath and rub with a sponge. Then wash the paste off with water and a soft cloth to rub the bath to shine.

How to clean the acrylic bath? No matter what they say, a raid is collected on acrylic surfaces rather quickly, especially if the bath is used for washing, for washing and for bathing our younger brothers. So, in the case of acrylic about any abrasive media speech can not be. During cleaning with such tools you simply scratch the entire surface and it will become dirty after each bath. Also, happy owners of acrylic baths should forget about the existence of chlorine, acid and alkali, which can cause a "chemical burn" to your darling. Take a simple soft sponge, moisten it with a regular detergent and gently wipe the surface of the bath.

Those who are in the whitening process are afraid to erase their hands, we offer a "for the lazy" method that is suitable for new and acrylic baths. In the evening, fill the bath with hot water, dissolve there two standards of any bleach containing oxygen, and go to bed. In the morning you will only need to open the drain hole. Bath will delight you with whiteness.

Gentle bath care: little tricks

Before you master the methods of bath surface care

Before you master the methods of care for the surface of the bath, you need to know the reasons for the occurrence of pollution and plaque in order to choose a more effective bleaching agent. These reasons include:

  • hardness of water;
  • the presence in water of a large amount of impurities that precipitate and after drying form a lime scale;
  • old plumbing from rusty metal pipes;
  • exposure to chemical compounds contained in large quantities in modern surface active detergents.

In order for these reasons not to accumulate pollution in the form of rusty drips or deposits of lime deposits and other ugly stains, you need regular care behind the bathroom:

  • rinse the bath every time after use and wipe it dry;
  • To clean fresh stains of rust and stains around the drain hole, use an aqueous solution of vinegar;
  • When bleaching enamel coatings, use surface-active sprays, which after spraying are easily cleaned with a soft sponge and rinsed with water;
  • water can be softened with the help of special filters installed on the water supply system.

We also remind you of security measures:

  • during long-term work with chlorine-containing cleaning agents, it is necessary to use a mask or more often go out to fresh air;
  • When you use acids or other potent agents to whiten your bath, be sure to wear protective gloves.

And after all our righteous works, we go into a dazzlingly shining bathroom and with a deep sense of satisfaction we fall into the arms of a snow-white bath filled to the edges with a soaring water, and enjoy this sparkling cleanliness. And somewhere in the kitchen, we are patiently waiting for a cup of hot aromatic coffee.

Add a comment