How to sew pot holders
The kitchen in the house often turns out to be almost the most main room. After all, not only all kinds of dishes are prepared here, the whole family gathers here, guests meet, important dates are often celebrated.
It is very important that the kitchen is comfortable and beautiful.The comfort in it will help create a special textile that can be made by yourself. Tack, perhaps the very thing with which you can try to start creating your own unique kitchen.
How to sew a tack with your own hands?
The main requirement for tacking - low thermal conductivity, therefore, it should be done in two or even three layers. As for the design and shape, the tack can be absolutely anything - round, square, in the form of mittens or in the form of fruit. Still, the most common types of tacks - square tack and mittens.
If you want to sew pot holders in the technique of patchwork, then read the articles Patchwork with your own hands, Patchwork for beginners.
Square pot holder
In order to own sew a tack square, You will need:
- 18x18 cm thick cotton fabric - 2 parts;
- 18x18 cm batting piece - 1 detail;
- thin cotton ribbon for edging 4x80 cm in size - 1 part (it is cut out on the side);
- thread the color of the fabric;
- wooden ring with a diameter of 4 cm.
On one piece, mark the squares of 35x35 mm at a 45 degree angle. Then connect the wadding and the part you mark up, equate the cuts and make lines on the markup. Take the second part and lay it face up on the received quilted part, make a line around the perimeter at a distance of 4-5 mm from the cut; four.
Prepare a strip for edging - bend the cut in half and iron. Then bend the cuts and also iron. As a result, you get a strip 10 mm wide. Starting from the middle of one side, make a border around the tack cut. Before completing the edging, form a hinged loop, 4 cm long, from the remnants of the strip and thread the prepared ring-holder.
How to sew mitts for the kitchen in the form of mittens?
To make a tack mitten, You will need:
- thick cotton fabric size 70x20 cm;
- piece of batting 70x20 cm;
- thin cotton fabric size 20x20 cm;
- strip for edging 50 cm long;
- threads of the desired color;
- wooden ring with a diameter of 4 cm.
Fold the fabric in half so that its front side is inside. Cut out the details of the tack, they should be 2 pieces each - a batting, a thick cotton top, a lining of fine cotton fabric. Overlay the details of the top, lining and batting on each other and make the lines diamonds 35x35 mm.
Make the border of the outer cut mitten. Attach to the outer cut loop with a ringlet. Fold the quilted blanks with the front part inside and sew them along the cut, the width of the seam should be 1 cm. On the rounding, add seams to the seams with scissors, and in the place of the thumb make a cut, while not reaching the line 3 mm. Turn the tack down on the front side and iron well.
How to sew a beautiful pot holders?
Beautiful and original tack is tack in the form of the heart.
You will need the following materials:
- suitable color fabric,
- stuffing material, for example, foam rubber,
- red braid
- desired color thread.
Still need your great desire to do something very touching.
Draw a heart according to your own pattern and divide it into 3 parts.
Cut out a heart entirely from a fabric of the same color (this will be the back of the tack) and 2 extreme parts also from the material of the same color.
Sew the ribbon around the edges from the inside and back. Make a pattern of the middle of the heart from a material of a different color. Now sew all parts of the heart together, do not forget to sew back.
Cut the resulting excess material and fill the heart with filler (it is better to use thin). Sew a red braid along the contour, and your tack-heart is ready.
Photos taken from the site: www.liveinternet.ru
Tack in the form of a maple leaf do it yourself
Beautiful and unusual tack can be Tack-maple leaf.
Cut out the template maple leaflets. One tack requires 3 such sheets, each subsequent leaf should be slightly less than the previous one.
Sew an eyelet to the base of the first sheet. Then put together 3 sheets and stitch them, so you get maple streaks.
Photos taken from the site: handmade.antikus.ru
How to sew pot holders from a drape?
Beautiful and uncomplicated version of the tack comes out of the drape. This material is quite dense and therefore does not require an additional layer. Cut 1 or 2 parts and trim the edges.
The original pot holders are made in the form of cats. Draw on paper not very big cute cats. Cut out the details of the drape. Collect the edge with a colored thread with a single crochet column and make a loop. Embroider a cat's attractive face with threads and make eyes-buttons.
Tack for a cozy kitchen is ready!
Experimenting with different types of fabrics, fillers, applications and other decor, you can start creating cute and pleasant things.. They will be able to decorate not only your own kitchen, but also the kitchen of your girlfriend, mother, grandmother or mother-in-law. A little imagination - and a wonderful gift made with your own hands is ready!
Especially for womeninahomeoffice.com.ru- CNezhana