Today you can find a wide variety of hairpins, bows and hair ties. Agree, girls with bows look very elegant and elegant. You can make a beautiful bow yourself. This process does not take you much time, and all the necessary materials, as a rule, can always be found at home. So, let's make together a beautiful ribbon bow with our own hands.
Bows of the tapes do it yourself: step by step instructions
Bows can be made of various materials, for example, from satin, nylon or rep ribbons. Let's look at how to make a bow of satin ribbon.
- satin ribbons of any color (5 and 2.5 cm wide);
- silver satin ribbon (width 0.3-0.4 cm);
- felt circle;
- flower for decoration;
- thread, needle;
- glue gun;
Stages of work:
- Take a satin ribbon 5 cm wide and cut it into 6 pieces (each should be 14 cm long).
- The obtained segments should be folded in half and assembled on a double thread, making a strong knot at its end.
- We have turned the petals, which must be combined into a flower and fastened with a thread.
- Now these same actions need to be done with a 2.5 cm wide satin ribbon. Thus, we have two flowers: a large and a small one.
- To the large flower on the back side, you need to glue the felt circle so that our bow is stronger. You can do this with a glue gun.
- Cut the silver ribbon into six 15 cm long pieces, fold the ears into them and glue the ends together, as shown in the photo.
- Now cut the silver ribbon into six pieces of 8 cm length and also make ears from them.
- All the preparatory work is completed, it is time to collect our bow. To do this, you need to glue the ears 15 cm long with a glue gun to a large bow.
- From above we glue a small bow.
- On the small bow you need to glue the remaining ears. To make our bow look spectacular, in the middle of the resulting flower you need to attach any small decoration, for example, a heart.
- The last thing left for us to do is to glue a hairpin. And our satin ribbon bow is ready!
Bows of nylon ribbons: master class
Original and beautiful look bows of kapron ribbons, made by hand.
- nylon tape 8 cm wide;
- 45 cm satin ribbon width of 5 cm;
- simple hair tie;
- Kapron tape - 40 cm;
- glue gun.
Stages of work:
- The first step is to cut the ribbon into segments of the same size. To do this, fold the nylon and satin ribbons in half. To the edges of the ribbons are not disheveled over time, they need a little singe a lighter.
- Kapron tape must be folded in half and one edge of the slide for the width of the edge. We retreat from the bending of the tape 2 mm and sew it along with small stitches.
- Now the tape must be pulled together so that the flower is obtained. To do this, its edges should be bent and sew around the middle.
- Satin ribbon must be folded so that its ends are adjacent to the middle. Then it should be stitched and pulled, as shown in the photo.
- Nylon bow to connect with the ribbon of satin. This can be done with a glue gun or a needle with thread.
- Now you should pull the braid and tie the ends on the knot. Glue the ribbon in the middle of the bow.
- In the middle of the ribbon you need to glue any decoration, for example, a beautiful button or a heart.
- On the back of the bow we attach a simple rubber band with a glue gun. It is desirable that it matches the color of the bow.
We make beautiful bows from rep ribbons
We have learned how to make bows from satin and nylon, now we will try to create an original hair accessory made from rep ribbon. We will consider the easiest and fastest way to create a bow.
- Rep ribbons 20 mm wide and 12 cm long - 2 pcs .;
Stages of work:
- We take a tape of the specified sizes and process its edges with a lighter.
- Fold the ribbon so that one of its ends is tucked to the middle.
- Now you also need to bend the second end of the tape.
- We got two small bows that need to be interconnected. To do this, sew them together, as shown in the photo.
- Now they need to be pulled off and wrapped several times with a thread, which should then be fastened. We have such a bow here. It remains only to attach a gum to it.
A selection of various schemes
There are a lot of options for making bows from rep ribbons. So, if you want your product to be more lush and colorful, connect the bows of satin and rep ribbons. In this case, you need to take a satin bow as a basis, and attach a rep in the top. Also, such a bow can be decorated with braid and make him the middle. Especially since we already know how.
We have learned how to make bows from different ribbons with our own hands, now we can safely fantasize and try to create our own masterpieces. By the way, such bows are used as decoration not only for hair, but also for gift wrapping. Creative success to you!