In order to decide which iron is better, it is not necessary to carry out a comparative analysis of all its functions - first of all it is necessary to pay attention to basic factors, including temperature regimes, steam volume, and, of course, the covering of the ironing part. Taking into account how the range of small household appliances has expanded even in this segment, it is extremely difficult to immediately understand which iron sole is better.
The main types of iron sole
There is no doubt that it is impossible to name a certain metal or sputtering as the best, and the rest - second-rate - cannot be, since all of them are designed for different tasks. It is difficult to blame ceramics for its brittleness, when this material in its structure needs careful handling, regardless of whether it is used in an iron or in a coffee pot. Thus, in order to find out which coating of the iron is better, you must decide on the tasks that you are setting for the device. And after - explore the most popular options today.
- Aluminum. The most inexpensive metal used for the class of budget irons, which, however, does not indicate its unsuitability for use. If he did not deserve attention, he would not have remained popular with consumers. Moreover, the same material is for more expensive devices, but supplemented by sputtering or a full layer of other substances.
- The main advantage of aluminum lies in its thermal conductivity - such a sole heats up almost instantly, as a result of which it is not difficult to iron out an urgently needed item. It cools, accordingly, as quickly, so you will not have time to notice the process of collecting the work, as the iron after it is disconnected from the network will become cold again, not threatening to accidentally tear a hole in anything.
- A significant drawback, which, for some reason, is not always taken into account, is the absolute lack of surface protection: it is very easy to scratch an aluminum sole even with a regular button. In addition, during operation, there are completely invisible scratches. Such damage is not just cosmetic - it entails a deterioration of the slip and subsequent damage to the delicate soft tissues. By the way, in order to carefully smooth them out, it is imperative to have different temperature conditions in addition to the aluminum base, if it is not supplemented with anything.
- Stainless steel. The heating rate of this material is, of course, somewhat lower than that of aluminum, and, accordingly, the cooling rate too. But its strength does not cause any doubts - you can’t scratch the sole with a simple button, simple small cracks due to exploitation are not worth mentioning. If you need a solid, reliable iron, then, of course, attention should be paid to stainless steel. That's just her weight will be higher than that of aluminum. More serious flaws in this material is not revealed.
- Metal ceramics. It is difficult to say whether to call it an independent sole or to be classified as additional coatings, but a number of manufacturers do not indicate other materials for the base, so it is included in the group of basic materials. Metal ceramics is quite light, it slides well, is instantly cleaned, and is also considered budget. However, it needs constant care, prevention of scratches, avoidance of buttons, locks, etc.
Also, to decide which iron is better, it is important to pay attention to the coatings that accompany the above materials.
- Teflon. It is usually present as an outer layer to the aluminum base. According to professionals, Teflon allows only to work more calmly with delicate fabrics, but does not affect the strength, so all the main disadvantages of aluminum in such an iron remain.
- Titan, sapphire. The most durable coating that can withstand buttons and locks, and even nails. It is really extremely resistant to scratches and chips, but not available to all because of its high cost.
Finally, you should pay attention to the relief: today the sole of the steamglide iron is gaining popularity - they have a large number of holes of various sizes, through which steam is supplied, which creates an air cushion between the surface and the fabric. This technique allows you to work with even the most delicate fabrics without the threat of harm to their structure. If the frequent ironing of chiffon, organza and other materials is irrelevant to you, the classical relief with 50-70 holes will suffice.