Ordinary plastic bottles in capable hands can turn into material for creativity. With their help, you can create a variety of flower arrangements. Such decorative flowers will decorate not only the house, but also a personal plot. Especially beautiful looking made from bottles of lilies of the valley.
How to make lilies of the valley from bottles?
For the beginning is to understand that. What materials will you need to make this decor. The main ones are bottles of the bottle. It is better to choose color. For stems fit green bottles, and for inflorescences - transparent or any light color.
To give the desired color plastic, you can use paint. It is best to use acrylic. They are environmentally friendly and odorless. In addition, the coating of such paints is sufficiently durable. They are diluted with ordinary water. Plastic for flowers is worth covering in 2 layers. So, after drying, there will be no gaps, and the color will be even.
Plastic bottles and durable material. It is better to stock up on a knife with a sharp tip in different size sizes of scissors. They will allow you to cut and cut the necessary parts.
Also, to create lilies of the bottle from the bottle will need wires and decorative items. Usually the stems of flowers strengthened in different ways. If the flower arrangement will decorate the plot, then you should buy bars of medium thickness. Sometimes the finished composition is decorated with leaves from artificial flowers. Those places where the wire is visible are wrapped with a floral tape. It looks especially good on the stems.
Plastic bottles keep their shape very well. Sometimes it is required to give details a rounded outline. Therefore, a lighter is required. Its flame melts plastic. Due to this, the desired effect is achieved. It is worth remembering that you need to hold a lighter at some distance. Otherwise, the plastic will just light up.
There are 2 main designs of lilies of the valley from bottles. Each of them is selected depending on the purpose for which the arrangement is. If you want to put it on the site, it will be more and much stronger. The materials will need to choose strong.
Flower Arrangement for Cottage: Master Class
This master class will help you to create a very simple, but at the same time a beautiful floral arrangement for giving or a backyard. As a result, you will receive enough large lily of the valley bushes.-
You will need:
- Green Plastic Bottles
- Streamer, knife
- Metal Screws
- Transparent or white plastic bottles
- Green floral ribbon
- Wire (flexible but thick)
- White acrylic paint - as needed
- To get started is to determine the height of future colors. Optimally - the average value in the region of 60-70 cm. If you have too long metal pins, then they should be shortened in any convenient way (jigsaw with a metal file or a grinder). You can also pre-select the material of the desired size.
- Pins can be prewrapped with green floral tape. The material can be replaced with tape. Also another variant is painting with acrylic paint.
- Take white plastic bottles and cut them 7 cm above the neck. These details will be the buds of the lily of the valley. Then form the petals. To do this, use scissors to cut the teeth on the resulting slice. Give them a curved shape. Hold the desired petal over the lighter and bend it in the right direction. So make the right amount of buds.
- The resulting blank, if necessary, paint the white acrylic paint.
- Take the green bottle caps and make a hole in the center of them. The diameter should be equal to the diameter of the wire so that future stems hold tight. Screw the caps onto the parts.
- Thread a piece of wire into the hole. You should get a lily of the valley on a small (15-20 cm.) Stalk. Place the wire in the right place of the metal pin and wind it with electrical tape or floristic tape. Place all the inflorescences.
- From the green bottles cut the leaves of the lily of the valley. They must be elongated and high - up to half the height of the pin. They also secure with tape at the base of the pin. Dig the finished composition into the ground.
- Remember that such lilies of the valley from plastic bottles look better on the site, if they are grouped into a kind of flower bed. Single designs look like a winning key. A decorative cushion can be created using the same tire that you should decorate beforehand with paint. It is also worth living the imitation of imitating the planting of love plants that do not bloom. The leaves will help to hide the orehkonstruktsiyu and give a flower bed a feeling of pomp.
Also, a little different way you can make small lily of the valley bushes. This option is more suitable for decorating places, well-protected from the wind.
You will need:
- Green tubes for juice
- White plastic bottles of 0.5 liters.
- Durable green film
- Scissors, knife, lighter
- Green nylon thread, floral ribbon
- Take a white plastic bottle and cut it 7 cm below the neck. Use scissors to cut the cloves of the petals along the edges. Round them by holding lighters over the fire.
- Cut a small piece of green film. Closure buds close the lid. Tape the cover with a film, forming a beautiful jagged edges. Tie it with a green thread, and hide the tips.
- In bottle caps of any color, make a hole with a diameter of about 3 mm. Insert a green juice tube into the hole. I got a flower on a stalk.
- From the same thick film cut a sheet for lily of the valley. It must be elongated and large enough. With the help of a thread, it should be attached to the base of the tube on a few levels. from its end. Unusual dummy!
Lily of the valley with their own hands: a lesson with photos of the finished work
In order to use the lilies of the valley at home, you can try to build flowers from less durable materials. The composition should be light and elegant. Then it will become a real decoration of the room.
You will need:
- Polystyrene beads (or chips)
- Green plastic bottles
- Scissors lighter
- Prepare a base for lilies of the valley. It can be made of plastic. To do this, cut from the green bottles a wide strip. Its ends should be kept above the fire, and then joined and fused. It turned out a circle. From penoplastavy cut the workpiece of the same diameter. We put it inside the green strip.
- Bottles cut into thin long strips. These will be the stems of the lily of the valley. The tips should be sharpened. Otherwise, you will be able to fix inflorescences and bases.
- Take the polystyrene beads on strips. Then each strip is attached to the foam.
- Start creating leaves. To do this, cut out of the green bottles wide strips, tapering upwards. They are also attached to the base of the foam. Takielestyan should close inflorescences. Better than a little lower than the stems.
Lilies of the valley from plastic bottles - a fairly common way to decor. They can be made from a variety of materials. Leaves - from green bottles, and buds from white. At the same time for the stems of the composition for the garden plot more suitable wire and metal pins. At home, the inflorescences themselves are made from crumbs.