How to make a dress from a shirt

If you want to buy a new dress, but shopping is not expected in the near future, do not despair! In this case, you may come in handy old or unnecessary shirt husband or boyfriend. There is nothing difficult in reworking this thing. Any inexperienced seamstress will be able to turn a shirt into a dress, possessing minimal sewing skills.

How to make a dress out of a men's shirt?

How to make a dress from a shirt

You will need:

  1. Shirt;
  2. Iron;
  3. Crayon or piece of soap;
  4. Scissors;
  5. Threads;
  6. Needles;
  7. Sewing machine;
  8. Elastic.

Instruction:

  • Find an old men's shirt in the wardrobe, carefully smooth it with an iron and place it on a flat surface.
  • Using the chalk, mark the contours of the future dress on the sides, starting from the shoulders. Mark the width of the shoulder, going down below, form a slot for the sleeves.
  • Then mark the contour of the sides, slightly expanding to the bottom of the shirt. Draw lines with allowance for seams.
  • On the contour of the shoulders to the bottom cut with scissors. Completely get rid of the sleeves as well as the bottom of the fabric on the side.
  • Attach the resulting part of the dress to the other side and mark along its contours of the cut line. The sides of the dress should be symmetrical, otherwise, you will not be able to get a beautiful dress.
  • When you apply the contour to the 2nd side of the shirt, cut off the excess fabric and form the 2nd side of the shirt dress. You got the main pattern of the future dress.
  • Now (either on a typewriter or by hand) from the seamy side sew together both parts of a dress-shirt. From the seamy side on the slits of the sleeves, make bends and sew on a typewriter.
  • Fold the resulting sleeve in the middle and attach it to the slits for the hands on the wrong side so that the middle of the sleeve is outside. You should have a short sleeve shirt dress.
  • From the seamy side, sew a basting seam to the sleeve for the arm. Then cut off the waste fabric and sew the sleeve on a typewriter. Do the same with the 2nd sleeve, but remember that they should be the same in length.
  • At the last stage, sew a small elastic band from the inside of the shirt at the waist level. She will carefully collect the fabric, thus emphasizing the waistline. Your dress shirt is ready! Pick up to her a beautiful wide belt, he will successfully emphasize the silhouette line.

Dress shirt: pattern and sewing description

How to make a dress from a shirt

You will need:

  1. Shirt;
  2. Scissors;
  3. Threads;
  4. Needles;
  5. Elastic;
  6. Sewing machine;
  7. Decorative elements (applications, beads, buttons, ribbons, etc.).

Instruction:

  • First of all, select a suitable shirt, fasten it on all buttons and lay it on a flat surface.
  • Armed with scissors, cut the shirt across the armpits. When you cut, make sure that the cut is smooth and the shirt does not move, otherwise your dress will turn out to be crooked and inaccurate.
  • Take the bottom of the shirt - it will be the skirt of the future dress. Fold it over and stitch the top edge so that the elastic can be inserted. Insert gum lengths, approximately 5 cm each in the armpits on both sides of the shirt. Make the assembly and stitch gum in the drawstring so that they do not move.
  • From the sleeves of the shirt make the details for the bodice of the future dress. To do this, cut off the sleeves, cut the seam from them along the length and cut the cuff. Cut the workpiece in half along the fold line. As a result, you should have two parts that resemble a cone. On the narrow part of the cones make tuck to the middle of the parts and sew them.
  • Using the overcoat seam, work the edges of the bodice by folding them twice 0.5 cm. Connect the details by putting one over the other. Sew the bodice to the bottom of the dress. Make straps from the remaining shirt fabric and sew them to the dress. To do this, cut out long strips approximately 2–3 cm wide, stitch them along, turn out and iron with iron. Give the straps the right length and sew to the dress.
  • You can sew one strap-on loop so that it covers the neck. In this case, you get a beautiful beach dress.
  • You can decorate the finished dress of the shirt on your own. You can sew some beautiful buttons or beads, sew an appliqué, or make bows of satin ribbons.

Dress of a shirt: how to make your own hands?

dress shirt with hood

You will need:

  1. Shirt;
  2. Threads;
  3. Pins;
  4. A wide scarf or a beautiful piece of cloth;
  5. Needles;
  6. Crayon or piece of soap;
  7. Scissors.

Instruction:

  • Take a men's shirt and cut off all the buttons from it. Give the sleeves the desired length, cutting off the excess.
  • Put on a shirt and smell it like a kimono or ordinary robe. Pierce the place of smell with pins.
  • Just below the waist line the line from which part of your dress will start.
  • Take a wide scarf or a piece of cloth, fold it in half so that one half is slightly larger than the other.
  • Attach the folded fabric to the intended line (the long part should be on the inside) and sew. If you wish, you can make tucks in the waist area, if you do not want to - tie a beautiful belt around your waist.
  • Wrap the sleeves and secure them around the shoulders using cut off cuffs. Dress shirt is ready!

how to make a dress out of a shirt

dress shirts

dress shirts

Dress shirt: photos of fashionable images

How to make a dress from a shirt

black dress shirt with white collar

beige dress shirt

dress denim shirt

dress shirt with stripes

denim dress shirt

To make a fashionable and beautiful dress, it is not necessary to contact a professional seamstress. All you need is your man’s shirt. Show your imagination and remember what you were taught in school during cutting and sewing lessons. In just a couple of hours of work, you will have an original designer dress that fits perfectly on the figure.

Add a comment