How to draw a maple leaf

If you are not an artist, but are just learning, then you have to master the drawing of various objects. Drawing leaves of various trees is a very good training. And maple leaves are a whole complex in the practice of various actions that the artist must perform.

How to draw a maple leaf?

In order to depict a maple leaf, you will need: paints (watercolor, gouache) or colored pencils, a simple pencil, an eraser.

So that you can correctly depict all the proportions of the leaf, draw it from nature. That is, before you draw, pick up a leaf in the park or in the forest. When you are well aware of the proportions of the sheet, you can draw it from memory.

So, inspired by the beautiful creation of nature that lies before you, get to work.

The first step in drawing the maple leaf

First you need to identify the future stem of the leaf. You need to draw it depending on the location of your sheet. If you draw for the first time and try to practice, it is better to arrange the sheet in a vertical direction. Accordingly, the line will also be vertical.

In order to mark the stem, you need to measure about a third of the leaf, which you should end up with. In the resulting point on the line two more lines will have to intersect, which will be the designation of the lower part of the sheet plate. They should not be straight, but resemble an arc.

The second stage of drawing maple leaf

Now you have another fairly simple step. Need to arrange the stem. The part that we measured, located below the intersection of two lines, is the future stem. When performing this action, difficulties and difficulties will not arise. All that needs to be done is to make it wider below and gradually do it to the point.

The next action you need to indicate in the figure, where the hollows of the sheet will be located. At these very places it is necessary to put points. That is, at the point, put between two segments (except those that form the stem).

The third stage of drawing maple leaf

Now you need to make out the sheet plate itself. First, moving from the stem along the bottom lines, draw wavy lines that will become the bottom edge of our leaf. When you reach the edge of the line, make a sharp corner, and continue to draw the wavy lines, moving to the designated point. At the end of each line we make sharp corners, after which we continue to draw wavy lines towards the points.

Remember that the points must have cavities. They also need to be done smoothly. All lines drawn by you should be wavy and angular. Now you can clearly see the contours of the future maple leaf.

The fourth stage of drawing maple leaf

Now the sheet must be given a finished look with the help of drawing veins. You need to draw them along all the lines that are inside the contours of the sheet. Streaks are small, diverging lines. When you have filled the leaf with streaks, you can assume that your drawing is ready.

Another way to draw maple leaf

First you need to draw a segment and break it into 3 parts. Then, as in the first method, measure out 1/3 of the part and leave it under the stem. A little higher we draw all the same intersecting lines. At a mark of 2/3 of the axis length, we draw a point from which two lines will be directed, at an angle to the first segment, two lines directed upwards. These lines should be short enough. Their length should be about 1/3 of the length of the entire axis (it can be even less).

Now we need to define the outline of the sheet. To do this, draw an angle at the end of the axis with two lines extending from each other. The length of these lines should be equal to 1/3 of the axis. So do with all the lines, except those that form the stem.

It remains only to perform detailing. That is, all lines must be replaced with wavy and angular. The corners, which are located at the ends of the lines, are replaced by sharper ones. Do not forget the streaks. Without them, the sheet will not look natural.

See also: How to paint in watercolor?

Which way of drawing maple leaf to choose is up to you. Practice drawing in different ways. Then it will be easier to choose a more acceptable version of the image of maple leaves. Very soon, having filled your hand, you will be able to reproduce them independently from memory. Give them color with paints and delight yourself and those around you with your little creations.