One of the main elements of any image of a young lady is just a hairstyle and, of course, hairpins, ribbons, etc. But often many people face such a problem when it is impossible to find the accessory in the store that fully matches the chosen dress. Do not despair - there is a way out of this situation: a hairpin can be made on your own!
Barrettes of satin ribbons: master class
There are many options for making hair clips for your own hands. But one of the most simple and beautiful - products from satin ribbons! So, for the manufacture of such ornaments you will need: a satin ribbon of the main color 5 cm wide, a satin ribbon 2.5 cm wide, other colors or the same, but polka-dotted, needle and thread, a small bead of light shade, an automatic hairpin, scissors, glue "Moment". After everything you need is at hand, you can proceed directly to making a barrette.
- First you should take the main color ribbon and cut it into pieces of a length of 7 cm.
- After you fold each strip and fold it at a 90 degree angle so that the distance from the corner to the edge of the tape is the same.
- Now you need to stitch the resulting petal on a thread with a needle.
- The same manipulations need to be done with another 4 petals. The result should be the first flower.
- Just the same flower needs to be made of a tape of primary color, only its size has to be more.
- Flowers need to stick on a pre-prepared basis. It is very easy to make it - just wrap a circle of cardboard with a cloth of the same color.
- Next you need to make another 1 type of petals. To do this, take a polka dot ribbon and cut it into strips 5 cm long. From each piece you get 1 petal. With the help of a ruler and a soldering iron, you need to solder a corner, and if there is no soldering iron on hand, then you can simply sew it with small stitches. After that, the excess fabric must be cut, while trying not to pull the fabric.
- Now the tape should be folded along the seamy side inward. The cut angle must be sharp, and the sharper it is, the smoother the petal will be.
- Petal now need to straighten and bend the corners to the center. And the edge of his alloy with a soldering iron or cigarette lighter.
- These petals need to make 6 pcs. After they should be stitched in bundles of 3 pieces.
- After all the elements are ready, you can begin to collect a barrette. First, in the middle, stick a flower of the largest diameter, on top of it - a smaller flower. Moreover, they should be fixed so that the petals of the upper flower are located between the petals of the lower one, and in the center of the smaller flower one should glue the bead. In the end, on the sides you need to glue the small sharp petals. That's all - decoration for hair ready!
Bows of rep ribbons: popular options
Rep ribbons have an unusual structure, because of this, and they look impressive. They are made of flowers, bows, etc. One of the advantages of this material is that it is very dense and almost does not crumble. And hairpins, made of rep ribbons, keep their shape well.
How to make a hairpin from rep ribbon?
Option 1. First of all, you need to take all the necessary materials and tools, namely: rep ribbons 10 mm and 22 mm long, they must also differ in color, scissors, lighter, colorless thin fishing line, needle, hairpin - base, glue, trash glass.
- First you need to choose the ribbon among themselves in color. To do this, arbitrarily arrange the bow, attaching to each other ribbon. The length of the workpiece depends directly on whether the bow is needed - short or longer.
- After the needed option has been selected, it is necessary to start cutting a wide ribbon, taking into account the stock of 2 mm. The edges of the workpiece must be burned.
- Now the ends of the workpiece should be connected with a needle and fishing line.
- Then you need to fasten the thread in the center and wind it several times to form a bow - base.
- After it is necessary to take the 2nd tape of another color 10 mm wide and wrap it on top of the base. After the required length has been determined with a margin of 2 mm, the rest must be cut off.
- By Bantu now need to sew a ribbon and drag in the middle.
- It remains only to hide all the seams and threads - for this you need to take a piece of monophonic tape 10 mm, measure the desired length and attach with thread. If you wish, you can sew a button on the middle, or paste a rhinestone.
- It's time to prepare the hairpin base itself. It should be pasted over with tape with glue, and the top should be glued. The hairpin is ready!
Option 2. You will need: rep ribbons of white, red and blue colors, hairpin, rhinestone, beads, lighter, glue gun, needle, threads, scissors.
- Cut a 4 cm long strip from a white ribbon, 3 cm from red, 2 cm blue, and rip off the edges of each ribbon with a cigarette lighter.
- Now you need to bend a piece of blue tape, after - red, putting in it a tape that is smaller in size, then bend over the white one and put both previous ones in it.
- At the point of connection of all blanks, you need to grab the edges of all blanks with a needle and thread. In the same way it is necessary to make 8 more petals. Then sew all the petals together at the junction of the petals, and glue the circle cut from the tape to the center.
- On the back of the flower, glue a hairpin for glue, and the flower and its middle can be decorated with beads.
Option 3. You will need: rep ribbons of different lengths, thread, needle, glue, rubber band or barrette, bead.
- First, you should decide on the size of the bow and the width of the ribbons themselves. For this, a 10 cm wide pattern can be cut out of the cardboard, and a slot can be made in the middle of the cardboard. Around this template and you need to wind the tape several times, and its tips at the end of the winding should look in different directions. The number of revolutions of the tape will depend on the desired number of loops, the ends must be secured with clothespins.
- Now, the tape should be sewed through the slot in the cardboard, the workpiece should be removed and the thread should be tightened;
- Other ribbons of color and size need to be made more bows, and then put them one on another and secure with glue or a needle.
- The middle of the bow can be decorated with rhinestones or just wrap it with ribbon. After that, the bow on the back side is only necessary to attach to an elastic band or barrette!
Refined decoration with your own hands: mastering kanzashi technique
Kanzashi is a hair ornament common in China and Japan. Nowadays, such jewelry is becoming popular among brides and among people whose specific activities are related to wearing kimono. In Russia, however, kanzasholyubilos women as a daily accessory, they are sold in stores in a large assortment. But it is not necessary to purchase such a decoration, it can be made independently at home!-
To make such an ornament you will need: a ribbon, tweezers, scissors, pins, a candle, a needle and threads or glue, a base for a hairpin, beads for decoration.
- From the tape you need to cut the required number of squares. Each of them should be folded in half, and then 2 more times in half.
- The corner of the ribbon needs to be cut and scorched over the candles, you can of course not do this, but then the angle will be very high.
- In the same way you need to make the required number of petals and connect them together with a thread or glue.
- Now it remains only to decorate the middle of the flower with rhinestones, buttons or any other decoration, connect with the base and everything - you can decorate the hair of any fashionable woman!
A variety of hair jewelry options
Hairpins - a beautiful decoration, they will be able to emphasize the individuality of the selected image! It is not necessary to go shopping in search of a suitable accessory, because you can do it yourself! In addition, you can make it together with your daughter or niece, because the occupation is incredibly interesting!