Beaded necklace

Beadwork is back in fashion. They can be purchased at jewelry stores or make yourself. Now on sale you can find a lot of materials for the manufacture of accessories: a large selection of beads and beads, accessories and other necessary things. If you are a beginner, start with simple jobs, and over time you will have more complex products.

Beaded necklace: photo and job description

Beaded necklace

Simple bead necklace with your own hands in the coral technique lags quickly and easily, but it looks original. For work you need beads with a rainbow of 2 sizes. Large - for the main thread and small - for fastening beads. You will also need material for pearls, the main thing is that it harmonizes well with the color of the beads. Buy a thin needle and line for work.

Make low out large beads of the desired length. Tie a loop at the end of this thread so that you can fix the necklace on the neck.

The next step will be the creation of branches. The line from which the loop was made to fasten, do not cut. Return it a little further from the loop, passing through several beads. Now you go backwards from her. At the free edge of the fishing line, wear a few small beads (adjust the length of the branch yourself) and a large bead, and then another 1 bead. Return the line back through the beads strung together. Do not pass through the last line. Now you have a small branch, but there are many more to do. They will make the necklace beautiful and fluffy.

The next branch will be performed a little differently. As in the previous version, you need to stitch a few green beads and 8 violet beads, and then thread the line into the 1st violet bead. Thus, you get a ring-petal, in its center you need to place a green bead or a larger bead. When the bead has secured the free edge of the fishing line, pull it through the thread with green beads to the main thread of the necklace.

Weave as many twigs as you like. They may be different. When complete weaving a large bead attach as a clasp. By the same principle can make a bracelet.

Beaded Necklace "Multicolored Buttons"

Beaded necklace

Bright and unusual necklace "Colorful buttons" is also performed quickly and easily, and looks impressive. Such an original necklace will immediately attract the attention of others. Button beads are now in fashion and everyone is used to them, but a necklace made in the shape of buttons from beads is rarely found.

Necessary materials:

  1. Matte fine beads of bright and contrasting colors - 5 shades
  2. Black or brown beads of the same size as the color
  3. Waxed thin cord - 5 m
  4. Thread for weaving beads or thin transparent fishing line

This product is made in the technique of weaving. This is a pretty easy way. Follow the clear pattern and weave the 1st button. To add volume, fold the part in half and join the edges. At the junction you will need to add some more beads. Connect the upper and lower joints using the same method. The optimal number of buttons 5 pcs., But you can do a little more or less.

The next step will be the union of all the buttons in the necklace. Divide the cord with scissors into short pieces, for each button you will need 2 pieces of cord 8-10 cm long, for 5 buttons you need to make 10 pieces of cord. Cords enter the button, they must intersect in the center. Buttons, stitched inside, tie each other with ordinary knots, which should be tied tightly. Tie long strings to the end knots. You can do the same way bracelet, earrings, brooch, ring and scrunchy.

-

Bright necklace for summer

Beaded necklace

  • This product looks extraordinary and interesting, and is done quickly and easily. Such a necklace can be performed even by someone who has never worked with beads. The most important thing is to choose very bright and contrast beads. You will also need to purchase special zip ties, they are sold in handicraft stores. You can, of course, replace them with a fishing line, but you have to work with it for a long time, and ugly knots can look out. Ties are fixed at the required length and firmly fixed. Purchase a satin ribbon approximately 0.5-0.7 mm wide. The number of zip ties is 36 pcs.
  • On each tie, string on 12 beads of different colors.
  • Make links for chains. Clamp the zip ties exactly near the last bead. Cut the remaining ends. You should have a chain of 13 links. Biserinki firmly held ties, which can not unfasten, they are very securely connected.
  • In the same way, make 2 more chains. And in the 2nd there should be 12 links, and in the 3rd only 11.
  • Connect all 3 chains together with another 1 link on the tie. This way you will have 1 link connecting all the chains on each side. Each such link should contain 18 beads.
  • Now you need to fix the necklace on the satin ribbon. Divide it into 2 parts, each should consist of 2 pieces. The total length of the segments should be 4. tie a pair of ribbons to the last link of each edge. Now the necklace is ready. On his neck, fix it, tying the ribbon in the bow.

Patterns of original jewelry

Beaded necklace

Beaded necklace

Beaded necklace

Beaded necklace

Beaded necklace

Beaded necklace

Beaded necklace

Making beautiful bead jewelery is not so difficult. There is a huge number of schemes and styles that you can weave even without a description. Also, with the acquisition of experience in this matter, you will be able to invent your own unique models of bead jewelery.

Add a comment